Weathercoat Flex Primer
An environment-friendly, water-based 100% acrylic sealer that works well under Weathercoat’s elastomeric coatings.
Surface preparation Clean the surface thoroughly. Make sure it is dry and free of all dust, contaminants and fungal growth. Remove laitance (accumulation of particles on fresh concrete) with a wire brush or sweep blast. Previous coatings must be removed completely. Treat fungal growth with Berger Fungicidal Solution.
Application procedure Before applying Weathercoat Flex Primer, stir the contents thoroughly. Ensure that the outside temperature is 30oC and that relative humidity is not greater than 85%. Apply evenly while avoiding runs and sags.
Tools you will need
On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.
** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.
35% +/- 2%
Low toxicity and odour
High alkali resistance
Make Your Plan
Let us design a project plan to suit your needs.