Others in this category
  • Berger Touchwood PU Primer Exterior for Wooden Surfaces
  • Berger Touchwood PU Primer Interior for Wooden Surfaces

Touchwood PU Primer Exterior

A hard-wearing, acrylic PU primer, designed to go under pigmented exterior top coats.

Touchwood PU Primer Exterior is an acrylic PU primer for pigmented top coats. It is based on suitably modified polyester containing zinc stearate, titanium dioxide and other additives along with a catalyst, to provide a tough, durable and hard-wearing low sheen finish. The product has good flow and film build-up.

Features

Excellent levellingGood hiding of baseGood resistance to household chemicals and beverages
Finishes -Low Sheen

Surface preparation Sand the surface thoroughly with emery paper. Wipe it clean with a dry rag and remove all traces of sanded wood, followed by a wipe with the PU Thinner.


Application procedure Thoroughly mix the base and hardener of Touchwood PU Primer Exterior using full quantities of both. Apply two even coats as needed. Make sure to stir the contents thoroughly before and during use, with a broad flat stirrer.

Tools you will need

Conventional Spray

Available Packs

Berger Touchwood PU Primer Exterior for Wooden Surfaces
18.9 Ltr

1 Coat
10.0 m2/Ltr**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids


56% +/- 2%
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

LOCATE A DEALER
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!