Others in this category
  • Berger Apcoflor FP 100, epoxy based  Primer for Floors
  • Berger Apcoflor HFP 120, high solid epoxy based universal Floor Primer
  • Berger Apcoflor MFP 140 is high solid  Solvent-Free epoxy based  Floor Primer

Apcoflor FP 100

A two-component epoxy resin floor primer, perfect for use on concrete surfaces.

Apcoflor FP 100 is a two-component, epoxy resin based floor primer that provides excellent adhesion between concrete surface and epoxy top coat or screed. This primer is ideal for the full range of Apcoflor top coats.

Features

Good chemical resistancePenetration & sealing propertiesGood bonding with old and new concrete surfaces
Finishes -Glossy

Surface preparation Prepare surfaces by blasting (allow new surfaces to cure first). Acid etching is recommended, followed by a water wash. Remove dust with a vacuum pump.

Application procedure Mix the base and hardener as per instructions. Apply Apcoflor FP 100 primer, stirring frequently. Apply two coats of primer on porous flooring.

Tools you will need

Stiff Brush

Available Packs

Berger Apcoflor FP 100, epoxy based  Primer for Floors
5 Ltr

Berger Apcoflor FP 100, epoxy based  Primer for Floors
20 Ltr

1 Coat
12.0 m2/Ltr @ 50 Micron DFT**

Coverage

On well-prepared surfaces, as per the painting system recommended. Please refer to the Product Data Sheet for surface preparation and method of application.

** Actual coverage may vary from the quoted coverage due to factors such as method and condition of application, surface roughness, and porosity.

Volume Solids


60% +/- 2%
  • Get Inspiration

  • Make Your Plan

    Let us design a project plan to suit your needs.

  • Colour Guides

LOCATE A DEALER
Note:-
The shades displayed on this website are indicative only and may vary from the actual colours due to variance in monitor calibration and resolution as well as screen settings.
Thank you for subscribing!